Black Oval Bee Soap

9

Continuing on with bee month, this adorably simple bar of soap is a fun and easy project for beginners and experts alike! Activated charcoal helps to pull out impurities while the combination of jojoba and rice bran oil leave your skin feeling extra hydrated for these blustery winter months. Read on to learn how to create this BEE-utiful soap!

Yields about 5 pounds (about three 6 Bar Oval Silicone Molds)

What You’ll Need:

Ingredients:

20 oz Distilled Water
8.52 oz Lye
0.3 oz Apricot Kernel Oil
3.5 oz Castor Oil
18 oz Coconut Oil
1.4 oz Jojoba Oil
9.5 oz Olive Oil Pure
16 oz Palm Oil
11.3 oz Rice Bran Oil

3.5 oz Sultry Black Jasmine Fragrance Oil
1 tbsp. Activated Charcoal (dispersed in olive oil)
99% Isopropyl Alcohol

Hardware:

6 Bar Oval Silicone Mold (3)
Small Ramekin
Measuring Spoons
Mini Mixer
Thermometer
Glass Pyrex (3)
Stainless Steel Whisk (2)
Stick Blender
Gloves
Goggles
Toy Bees

**If you are not local, you can get all of this and more at Bramble Berry! They will ship directly to you!**

If you’ve never made Cold Process soap before, stop here! I highly recommend checking out Brambleberry’s FREE four part SoapQueen.tv series on Cold Process Soapmaking, especially the episode on lye safety. And if you’d rather do some reading, Bramble Berry carries a wide range of books on the topic, including Anne-Marie’s newest book, Pure Soapmaking. You can also checkout the digital downloads for that instant gratification factor.

__________

COLOR PREP:

In small ramekin or dixie cup, measure out 1 tbsp activated charcoal and add to a small amount of any fixed oil (we chose olive oil). Use just enough oil to saturate the charcoal.  Then combine using Bramble Berry’s mini mixer.

Weigh out 3.5 oz Sultry Black Jasmine FO into a small container and set aside.

LYE PREP:

Measure the distilled water into one glass container, and the lye into another. Carefully add the lye to the water and gently stir with a stainless steel whisk until solution is clear. Allow the lye to cool to around 115 degrees by either labeling and setting aside, or by placing into a designated freezer. We recommend using Brambleberry’s Infrared Thermometer. These are amazing because they are so easy to use and you don’t have to worry about getting your thermometer covered in lye water!

While the lye is cooling, weigh out all the fixed oils in a large glass Pyrex bowl and heat in the microwave until the oils are around 115 degrees.

Once both the lye solution and the fixed oil solution are around 115 degrees (between 10 degrees of each other) you can begin soaping! Make sure you have gloves, goggles and long sleeves for protection.

Place the stick blender into the oils at an angle and burp the blender by gently knocking the stick blender on the bottom of the Pyrex to avoid mixing in any air bubbles. Pour the lye solution down the arm of the stick blender and start mixing until you have reached a thin trace. The fragrance oil we will be using accelerates trace, so beginning with a light trace will help us when we add that fragrance oil.

1 2

Once you have reached trace, add the activated charcoal and mix with a whisk until fully incorporated.

3 4

Add the fragrance oil and whisk until fully incorporated.

5

As this fragrance accelerates trace, you will want to work quickly when pouring the soap into the mold.

6

As soon as you have poured the soap into the oval silicone mold, place one of Brambleberry’s toy bees in the center of each cavity just enough for the bee to stick to the soap.

7

8

Spray with 99% rubbing alcohol to reduce soda ash and cover to encourage gel phase.

After a few days, unmold and let sit for 4-6 weeks to fully cure.

10

Do you LOVE activated charcoal as much as we do? If so, check out this awesome Soap Queen tutorial on Charcoal Facial Soap!

__________

For the month of February, take 15% off white and yellow beeswax.

Do you FOLLOW us on Pinterest?

Comments are closed.